STEP #1- On the Camera Tab
[Monitor Control]
Figure
2-1 Monitor Control Setup
Rec Video: Click the
check box to enable the recording function. Use the
drop-down list to choose the desired recording mode.
Selections available in the drop-down list include:
Motion Detect, Round-the-Clock, and Day/Night. Click
the Recording Codec button to select method of recording
compression for your video. Click the little blue
pointing-finger to apply to all cameras if so desired,
otherwise, repeat the process for each camera individually.
[Motion Detect]
Motion Sensitivity: There
are 10 levels of sensitivity for motion detection.
The higher the value, the more sensitive the system
is to the motion.
Mask Filter: Mask instructs
the system to ignore movement under masked area. Mask
could be applied to repetitive motion that should
be ignored within the surveillance area, such as street
trees. Buttons used to modify the masked area are
as followed:
-------------------------------------------------------------------------------------------------------------------------
STEP
#2 - On the General Tab
[Monitor Option]
Post-Rec Motion: Records
video after motion has stopped for a specified period
of time (1 – 10 seconds).
