Scheduling
A schedule can be used to selected cameras at different
times, and select whether alarms or activity is enabled.
The schedules have two options:
Video Schedule:
A schedule starts the surveillance system at user-defined
date and times.
I/O Schedule:
A schedule starts I/O surveillance at user-defined
date and times.
Set your surveillance preferences:
[Time]
Enter Start and End time of the
schedule.
[Monitor Invoke]
Sets alert methods in case of
motion.
Rec. Select to record while monitoring.
From the drop-down list, select to record the videos
by Motion Detect or
Round-the-Clock.
Pager/E-Mail. Pager or e-mail
alerts on event activation.
Output. Select to trigger corresponding
I/O devices in case of motion. To set the corresponding
I/O device, see Adjusting
Individual Camera on page 22 in this chapter for details.
[Remote]
Click to send the triggered images
to these applications.
View. Sends videos to Remote
View application (Remote View application must be
open to receive the
videos).
Center. Sends live videos
to Center. From the drop-down list, select whether
to send videos when Motion
Detect or Round-the-Clock. (Center must be open to
receive the videos).
[Week Days Enable Schedule]
Press to select days for the
video schedule.
[Start]
Grayed out. It will be enabled
only in I/O Schedule.
[Camera]
Select to apply all settings
to selected cameras. Cameras that are not connected
are grayed out.
1. Press
Add Schedule to confirm all settings. The new schedule
will be listed in different bar
colors
in the Schedule List Window if setup successful. Color
presents following actions would be started
within the defined time:
Red:
Recording enabled
Green:
Pager/e-mail notification enabled
Blue:
System will send videos to Remote View
Jade:
I/O monitor enabled
Purple:
System will send videos to Center
2. Repeat
the process to set up more schedules.
3.
To modify a schedule, select the schedule you wish
to make the change, then press Modify Schedule
button to modify.
4.
To delete a schedule, select the schedule and hit
the Delete key on keyboard. Click OK to apply schedule.
To configure a schedule for Holidays, follow these
steps:
1.
Select the Holiday Schedule in the Setup Schedule
– Add period schedule dialog box.
2.
All setups are the same as in Weekly Schedule, except
the section shown as follows. Click the drop-down
arrow and select a date from the pop-up calendar.
Click Apply to add dates to holiday schedule.
